Product Enlarge

<< Back to Computerized system

Computerized Engine Data Loggers -
BSPIL - CS-0001
 
Air Cooled breaking system with completes Torque and speed Sensors mounted on base plate and associated Electronic Controller. Power Dissipation - 2.5 KW, maximum Speed - 1500 RPM, Torque Sensor -Reaction Type Strain sensitive load cell coupled to the Eddy Current Brake using Torque Arm, Speed - 'Tacho' Generator integral to the Eddy Current Brake, space needed 3x.4x4 M.

KIRLOSKAR Brand new Diesel Engine 5HP at 1500 RPM, 4 Strokes and Vertical water-cooled.

LOADING DEVICE: A Suitable capacity Eddy Current Dynamometer with loading arrangement consisting of Modular Design type foot mounted air cooled Eddy Current Dynamometer having both input and output shaft with built in Tacho-Generator capable of delivery a constant rated 100% full load torque and electronic control unit suitable for operating on 230V, 50Hz input supply, exciting Volt 80V, Max. Current -5A fitted with electronic control card, load exciting potentiometer, speed indicating Digital RPM meter, Power On/Off switch and run indication lamp.

The EDDY Current Dynamometer is with

1. 200mm diameter pulley fitted on the output shaft of dynamometer 
2. Spring Balance
3.  Love joy couplings to interconnect prime mover and dynamometer.
4.  MS Channel iron base plate to install the dynamometer and the prime mover.
5.  Angle Iron stands attached with bed plate to install the spring balance weighing gear.
6.  Steel rope to interconnect spring balance weighing gear and pulley.

Specifications: -

9 Channel Data Logger for IC Engine with Computer Interface 

1. This System consist of 6 channel of Chromel Alumel Temperature Sensor Type K and 2 Channel Load Cell one for the Load and other to measure the fuel Flow, and 1 Channel for RPM by proximity pickup.

2. The Load Cell of 50kg can be mounted to the rope Break Drum shaft with Comes with Software for Data Logging.

3. Loading Device: Rope brake consisting of brake drum and rope brake arrangement with rope, hand wheel, spring balance weight hanger and set of dead weights for conducting experiments

4. Fuel Measuring Arrangement; Consisting of fuel tank, burette three way cock and connecting tubes are supplied to measure the consumption of fuel 

5. Air Intake Measurement: Arrangement for measuring the heat carried plate, manometer, thermocouple, provided to measure room temperature, exhaust gas temperature with pocket connection.

6. Cooling Water Arrangement: Arrangement for measuring the heat carried away by cooling water consisting of suitable inlet and outlet temperature of the water. A water meter to measure the rate of flow of cooling water.

7. Digital Temperature: Multi channel temperature indicator with thermocouples

8. Are provided to measure the temperature of cooling water and exhaust gas at various points of the test rigs.