<<
Back to
Instrumentation List
|
Temperature Control
Setup - BSPIL-IST-05026
Temperature Control Loop Setup comprises of RTD temperature Sensor to sense the
temperature. The water glows through the Rotameter and Process tank to which a
heating coil is fitted. The heater is controlled by a Thyrister drive. The
Thyrister drive is connected to PID controller. The manual control valve can
control the water flow. The system is mounted on a tabletop model with all
necessary piping. The water inlet and outlet are brought out through a manual
control valve. Water at approx. 100 LPH has to be supplied to the system
externally.The electronic panel comprises of ADC/DAC card with RS-232 interface.
Displays indicate the process value and set value. Software is provided for
experimentation, PID Control settings (P, PI, PD and PID mode) Data storing,
Online data acquisition, Off line analysis, Printing of data's can be done
easily.
Specification :
Temperature transmitter : RTP (PT-100) with transmitter Output 4 - 20m A
Rotameter: 10-100 LPH
Heater : 1.5 KW
Thyrister : 1.5KW with 4 to 20 mA input to control heater.
ADC/DAC Card :12 bit resolution,8 input 1 output with Rs 232 Serial Interface to
PC.
PID Controller: Software to set P, PI, PID, PD Mode with Controller and
Acquisition, Trend plot, Offline, Analysis and Printing.
|
