<<
Back to Thermal List
|
Multi cylinder 4 storke petrol engine test rig with rope
Brake dynamometer new ambassador engine
BSPIL-THR-PE-MCFSRE-20016
a. 4 STROKE Vertical, 4 cylinder, New Ambassador Car’s petrol engine developing about 10 HP at 1500 rpm with self starter, battery, alternator, lubrication oil filter, fuel pump ignition coil, exhaust gas silencer, oil pressure gauge, choke control, throttle control.
b. LOADING DEVICE: A Rope Brake dynamometer complete with weighing gear dead weights in Kgm units suitable for testing the engine at different speeds. The engine and dynamometer are directly fitted on a substantial base plate.
c. PANEL BOARD ARRANGEMENT: Consisting of ignition and starting switch, ammeter, fuse units, Pilot lamp high voltage knife switch assembly for cutting of each cylinder for conducting Morse Test
d. fuel Measuring Arrangement Consisting of fuel tank, burette, three-way cock fuel piping from fuel tank to engine.
e. AIR INTAKE MEASUREMENT: arrangement for measuring the heat carried away by exhaust gases consisting of a suitable capacity air tank, orifice plate, manometer thermocouples provided to measure room temperature, exhaust gas temperature with pocket connection
f. Cooling Water Arrangement: Arrangement for measuring the heat carried away by cooling water consisting of suitable inlet and outlet piping with flow control valve thermocouples are provided to measure the inlet and outlet temperature of the water.
g. Digital temperature: Multi channel temperature indicator with thermocouples are provided to measure the temperature of cooling water and exhaust gas at various points of the test rig, which is duly calibrated as per ISO AND QS Norms.
|
