<<
Back to Thermal List
|
Single cylinder hero honda engine coupled with
Data logger petrol engine- BSPIL-THR-PE-SCDAT-C-20020E
HERO HONDA Brand new Engine 5HP at 1500 RPM, 4 Strokes and Vertical water-cooled.
LOADING DEVICE: A Suitable capacity Eddy Current Dynamometer with loading arrangement consisting of Modular Design type foot mounted air cooled Eddy Current Dynamometer having both input and output shaft with built in Tacho-Generator capable of delivery a constant rated 100% full load torque and electronic control unit suitable for operating on 230V, 50Hz input supply, exciting Volt 80V, Max. Current -5A fitted with electronic control card, load exciting potentiometer, speed indicating Digital RPM meter, Power On/Off switch and run indication lamp.
The EDDY Current Dynamometer is with
> 200mm diameter pulley fitted on the output shaft of dynamometer
> Spring Balance
> Love joy couplings to interconnect prime mover and dynamometer.
> MS Channel iron base plate to install the dynamometer and the prime mover.
> Angle Iron stands attached with bed plate to install the spring balance weighing gear.
> Steel rope to interconnect spring balance weighing gear and pulley.
Specifications: -
9 Channel Data Logger for IC Engine with Computer Interface
> This System consist of 6 channel of Chromel Alumel Temperature Sensor Type K and 2 Channel Load Cell one for the Load and other to measure the fuel Flow, and 1 Channel for RPM by proximity pickup.
> The Load Cell of 50kg can be mounted to the rope Break Drum shaft with Comes with Software for Data Logging.
> Loading Device: Rope brake consisting of brake drum and rope brake arrangement with rope, hand wheel, spring balance weight hanger and set of dead weights for conducting experiments
> Fuel Measuring Arrangement; Consisting of fuel tank, burette three way cock and connecting tubes are supplied to measure the consumption of fuel
> Air Intake Measurement: Arrangement for measuring the heat carried plate, manometer, thermocouple, provided to measure room temperature, exhaust gas temperature with pocket connection.
> Cooling Water Arrangement: Arrangement for measuring the heat carried away by cooling water consisting of suitable inlet and outlet temperature of the water. A water meter to measure the rate of flow of cooling water.
> Digital Temperature: Multi channel temperature indicator with thermocouples
Are provided to measure the temperature of cooling water and exhaust gas at various points of the test rigs.
|
